Seleccionar página

How to connect a «thing» via HTTP using Ultralight 2.0

por | Mar 24, 2017 | FIWARE, Secmotic | 0 Comentarios

In this blogpost we are going to see how to connect a «thing» to the Internet of Things, using Ultralight 2.0 over HTTP using FIWARE.
In order to do it, we are going to use a Intel Edison board. We will add a temperature sensor. So our «thing» will be a thermometer, and we will send the information using the Ultralight 2.0, developed by Telefónica. In addition we will configure everything to use FIWARE.
So we will need:

  • An Intel Edison board and a temperature sensor.
  • A Cloud instance, or a server with access via SSH
  • Intel XDK or a similar IDE to program our «thing»
  • FIWARE Generic Enablers: Orion Context BrokerIoT Agent Ultra Light 2.0

The first step will be configure an instance, which we can connect with, and configure it. Having access to a cloud, we can launch an Ubuntu 14.04 instance and access to it via ssh. Then, we will install Docker and Docker-Compose, to configure our docker-compose file, which will be as follows:
[codeblocks name= ‘Uno’]
Now, in order to have the services up and running, we will use the command
[codeblocks name= ‘Cuatro’]
And after this, using the following commandwe will check that the services are up and running.
[codeblocks name=’Cinco’]
FIWARE services
The next step will be configuring the IoT Agent, in order to communicate with  Orion Context Broker. To do it so, we will follow the next steps:

  • Extract the configuration file from the IoT Agent (docker) to the home directory of our instance (local host)
  • Modifying the parameters
  • Insert back again the configuration inside the IoT Agent docker container.
  • Restart the IotAgent

In order to copy the configuration file, we will use the command:
[codeblocks name=’Seis’]
We are now configuring our IoT Agent in order to work over HTTP, so everything related to MQTT will be seen later.
[codeblocks name=’Dos’]
The most important thing of this file is specifying the «service» and «subservice» headers that we are going to use, the entity type (in this case «Thing») and a URL and port where Orion Context Broker can be reached from the IoT Agent. In this case, the private IP of the instance will be enough,but we should avoid using localhost reserved word, because if we do it , we will find communications problems, since the docker container acts as a virtual machine with its own network interface, and we will not be able to communicate if we use this reserved word or
Now we will copy back the modified file and will substitute what was inside the IoT Agent container, and finally, we will restart the service, in order to reload the configuration. To do it, we will use the following commands
[codeblocks name=’Siete’]
We have now our Cloud architecture, so once we have done it, we can now use our Intel Edison. We will be using the Intel XDK IDE, to program in Node.js and upload it to the board. The steps to be followed are:

  • Connect the board
  • Configure it to work in the same network
  • Connect the sensors
  • Upload the code
  • Leave the board sending data

The Intel Edison has two USBs, one for the data transmission and another one for the power supply. We connect both of them to our computer and, in the case of Mac or Linux, there is no need to install any additional driver. In Window’s case you will need to install some specific drivers.
Once it has been done and with the board connected to the computer, we open a Terminal and use the command:
[codeblocks name=’Ocho’]
We will be asked to introduce user and password. In the first usage it will be root user and blank password. Once we are inside the board, we will configure it, and use the command
[codeblocks name=’Nueve’]
In this way, we will assign the device a name and a password, and will connect it to the same WiFi where our computer is.
Them we are going to use an LCD screen and a temperature sensor to show the ambient temperature recollected by the sensor, and send it through the Internet to our Orion Context Broker in the cloud. To do it so, we connect the Arduino shield to our Intel and connect the temperature sensor to one of the analog input/outputs and the LCD to one of the I2C input/outputs. The board have the following appearance
Intel Edison with Ultralight
Now it is the moment to upload the code in the board. We will open the Intel XDK and we will upload the code, that will be explained later.
[codeblocks name=’Tres’]
In this code the function useLcd() is the first to be called, which will write in the upper part of the LCD a message, and will be followed by the rotateColors(display)waiting2(display) and uploadData() functions. The rotateColors function will only change the LCD screen colors, while the function waiting2 will read the sensor and will write its value in the display, to finally call the uploadData function. The uploadData function will communicate our «thing» with the cloud using the Ultralight 2.0 using HTTP
We can see in the IntelXDK console how the data is being uploaded if we execute the code
Ultralight communicaton
In addition, we can now check that the data are being collected correctly in Orion Context Broker if we do a REST request to its API
Orion Ultralight

Finally, we can create a dashboard to visualize the data of Ultralight 2.0 in real-time in a very easy way thanks to

With an existing account of, we will add the datasource. We will have to introduce the parameters like Fiware-Service, Fiware-Subservice, Host:Port, etc.
Datasource for Ultralight
Then we will add a pane too, later on, add a widget of the Gauge type.
Next, we link the data source that we just added to the graphic value. In this case it would result as follows:
Gauge for ultralight
Once saved, we will be able to visualize our graphic and see how it changes every second.
Gauge Ultralight
The whole process can be found on our YouTube channel. You can find the video here:
[fusion_youtube id=»» width=»» height=»» autoplay=»false» api_params=»» hide_on_mobile=»small-visibility,large-visibility» class=»»][/fusion_youtube]
This was the post about how to connect a «thing» to the Internet of Things using FIWARE and the Ultralight 2.0 protocol over HTTP
Don’t miss the next post, where we will discuss about how to communicate via MQTT instead of HTTP!

0 comentarios

Enviar un comentario

Tu dirección de correo electrónico no será publicada.


Conoce conceptos clave de la era digital en nuestro HUB



Descarga nuestro ebook con todo lo que necesitas saber sobre IoT Industrial.

Suscríbete a nuestra newsletter

Recibe las últimas noticias sobre innovación y nuevas tecnologías y mantente al día de los avances más destacados

Cesión de datos

Calle Factores 2, 41015 Seville

Phone: +34 618 72 13 58